How to Determine Shirt Quality

You’ll know at a glance, almost. The term premium refers to the quality of materials, the care taken in the manufacture and finishing.

Whether a shirt is top of range or not, we therefore the fabric intéresserons, buttons, and clothing details.


A high-end shirt must be made of fabrics of very good quality. This depends on the one hand the quality of the weaving: double ply being preferable. There are two son twisted around each other; a bit like a minature rope.

Next comes the quality of the fiber. Cotton is a natural material, its quality is as important as is that of grapes to make great wine. Egyptian cotton is considered to be the Rolls Royce of cotton; This is a rare species with particularly long fibers giving it a softness and good resistance above average.

Finally comes the fineness of the fiber, called titration. More titration, the more the wire is thin and soft tissue. Tissues typically range from 80 to 120, and more. Watch out too for son: the fabric is so soft but very fragile and difficult to maintain.

The Seams

The point should be regular and dense: minimum 7 points / cm is the benchmark of solidity and elegance. The seams will not be loose or gathered in places.
According to tradition they are all “English” that is, with only one apparent wire. But this technique is complicated and expensive, most brands opt for the “double needle / double thread” so you see two sewing son.

Maintaining The Collar And Cuffs

For their collar and shirt cuffs maintenance necessitates a reinforcing material. The traditional method is to insert a layer of percale between two pieces of fabric and sew them together.

Another technique is the interlining: adding a glue layer between two layers of fabric. Check allpubliclibraries for men’s shirt buying guide. This process is more efficient in terms of production, and with advances in technology the result is no longer a card and stuffy shirt collar; but maintaining a garment without fault resistant over time.
If the purists swear by the first traditional way, it is very expensive and complicated, and many brands are now using the stabilizer. (thank you infinitely for Good Lord for his so clear explanations on this point!)

Whales Neck

Most brands provide with their whale passes (small fixed or removable tabs) permitting styli not rebiquer, let alone when the tie port.


In an ideal world all buttons are pearl. But in reality it is better to have nice (and strong) plastic buttons as the too fine pearl and poor who could not resist a long time to wash, button fastenings and déboutonnages …

Sewing Button

There are different, the most common being the seam cross and parallel, they have the advantage of being workable by machine, while being very reliable.
The third “zampa di gallina” (chicken or leg) is used in the “largely” hand, it is impossible to do with the machine.
the most important is to make sure that the button is securely sewn, if it moves it might not last long.

Sewing buttons on foot wound represents a real plus to avoid losing a button and facilitate the button: a wire is wound around the base of the button distributes the tension to avoid breakage of an external thread.